BOILER INOX ISOTEMP BASIC

The Isotemp Basic boiler heats water both with the 230V electric heating element when connected to shore power, and by using engine heat via a heat exchanger while under way, with no need to choose between the two sources: it switches from one to the other depending on what's available at the time.

Tank, pipes and water-contact parts in AISI 316 stainless steel welded under protective gas to eliminate corrosion risk, casing and feet in non-magnetic AISI 304 stainless steel. CFC-free expanded polyurethane insulation for lower heat loss. The 750W element is nickel-plated copper, positioned so the tank stays accessible for cleaning.

a 4 bar safety valve with a non-return valve that reduces or blocks water loss from expansion, simple winter drain-down, dual safety thermostat with manual-only reset. The regulating thermostat is pre-set to keep the water above 70°C, a threshold that prevents bacterial growth in the tank.

To protect the boiler over time, fitting an upstream water filter is recommended: internal deposits caused by the absence of a filter are not covered by warranty.

Technical specifications:
- 24 litre capacity
- Mixed heating: 230V/750W electric element + engine heat exchanger
- Tank, pipes and water-contact parts in AISI 316 stainless steel
- Casing and feet in non-magnetic AISI 304 stainless steel
- CFC-free expanded polyurethane insulation
- Horizontal or vertical installation
- a 4 bar safety valve
- Dual safety thermostat, manual reset
- Regulating thermostat pre-set above 70°C